Proyecto de transformadores de pulsos de potencia
Resumen
Se presenta un método para el diseño de transformadores de pulsos de alta potencia basado en consideraciones analíticas que conducen a ecuaciones de dimensionamiento que permiten el proyecto en un solo un paso, que puede mejorarse luego mediante iteración. Se incluye un ejemplo de procedimiento de diseño de transformador utilizado en un generador de pulsos para electroporación.
Palabras clave
Referencias
T. Kotnik,W. Frey, M. Sack, S. H. Meglič, M. Peterka, and D. Miklavčič, "Electroporation-based applications in biotechnology", CellPress Review, vol. 33, ISSUE 8, P480-488, August 01, 2015.
C. Li et al., "Comparison of Bipolar and Unipolar Pulses in Cell Electrofusion: Simulation and Experimental Research," in IEEE Transactions on Biomedical Engineering, vol. 66, no. 5, pp. 1353-1360, May 2019.
S. H. Jayaram, “Pulse power applied to process industry and environment”, 4th IEEE GCC Conference 2007. (Available: http://faculty.kfupm.edu.sa/EE/sbaiyat/events/IEEEGCC2007/Jayaram%20invited%20paper.pdf).
J. R. Beveridge, K. Wall, S. J. MacGregor, J. G. Anderson and R. A. Fouracre, "The influence of pulse duration of monopolar and bipolar profile pulsed electric fields on the inactivation of obesumbacterium proteus-a spoilage microorganism," Conference Record of the Twenty-Sixth International Power Modulator Symposium, 2004 and 2004 High-Voltage Workshop, San Francisco, CA, 2004, pp. 615-618.
N. K. Kishore, S. S. Emani, T. K. Mait, and G. S. Bisht, "Studies on pulsed electric field applications for food sterilization", IEEE Second International Conference on Industrial and Information Systems, ICIIS 2007, 8 - 11 August 2007, Sri Lanka.
Z. Zhang, X. Tan, "Review of high power pulse transformer design", Physics Procedia, SciVerse Science Direct, Vol. 32, 1875-3892, 2012.
H. E. Tacca, “Flyback vs. forward converter topology comparison based upon magnetic design criterion”, Eletrônica de Potência, revista de la SOBRAEP, (ISSN 1414-8862), vol. 5, No. 1, Brasil, mayo 2000, p. 16 - p. 27.
K. Venkatachalam, C. R. Sullivan, T. Abdallah, and H. Tacca, “Accurate prediction of ferrite core loss with nonsinusoidal waveforms using only Steinmetz parameters”, IEEE COMPEL 2002 - The 8th Computer Workshop on Computers in Power Electronics, (ISBN 0-7803-7554-8, ISSN 1093-5142), Mayagüez, Puerto Rico, junio 2002, p. 36 - p. 41.
H. E. Tacca, “Extended Steinmetz Equation”, Reporte de investigación posdoctoral, Thayer School of Engineering, Dartmouth College, Hanover, NH, Estados Unidos, octubre de 2002 (DOI: 10.13140/2.1.2837.5363).
N. Mohan, T. M. Undeland, and W. P. Robbins, "Power Electronics: Converters, applications and design" (2nd Ed.), J. Wiley and Sons, N.Y, 1995. (Chap. 30, sect. 30-6-2-4, eq. 30-41, pag. 769 y sect. 30-7-4, pag. 775).
J. Mühlethaler, J. Biela, J. W. Kolar, and A. Ecklebe, "Core losses under the DC bias condition based on Steinmetz parameters", IEEE Trans. on Power Electronics, vol. 2, No. 2, Febr. 2012.
G. S. Dimitrakakis and E. C. Tatakis, "Investigation of high frequency effects on layered coils", 13th International Power Electronics and Motion Control Conference (EPE - PEMC 2008), Poznan, Poland, 2008.
E. L. Barrios, A. Urtasun, A. Ursúa, L. Marroyo, and P. Sanchis, "High- frecuency power transformers with foil windings: Maximum interleaving and optimal design", IEEE Transactions on Power Electronics, Vol. 30, No. 10, Oct. 2015.
P. L. Prasanna, H. Mangalvedekar, A. Tillu, K. Dixit, D. Chakravarthy, and K. Mittal, "Design of high voltage pulse transformer for solid state pulse generator for PIII applications, and prototype development", 16th National Power Systems Conference, India, 15-17 Dec. 2010.
A. Van den Bossche and V. C. Valchev, "Inductors and transformers for power electronics", CRC Press - Taylor & Francis, U.S.A., 2005.
DOI: https://doi.org/10.37537/rev.elektron.4.2.102.2020
Enlaces de Referencia
- Por el momento, no existen enlaces de referencia
Copyright (c) 2020 Hernán Emilio Tacca
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Revista elektron, ISSN-L 2525-0159
Facultad de Ingeniería. Universidad de Buenos Aires
Paseo Colón 850, 3er piso
C1063ACV - Buenos Aires - Argentina
revista.elektron@fi.uba.ar
+54 (11) 528-50889