El Campo Magnético Generado por las Bobinas de Helmholtz y sus Aplicaciones a Calibración de Sondas

Autores/as

  • Walter Gustavo Fano Universidad de Buenos Aires, Facultad de Ingeniería
  • Ramiro Alonso Universidad de Buenos Aires, Facultad de Ingeniería
  • Gonzalo Quintana Universidad de Buenos Aires, Facultad de Ingeniería

DOI:

https://doi.org/10.37537/rev.elektron.1.2.25.2017

Palabras clave:

Helmholtz, Calibración, Campo Magnético

Resumen

Las bobinas de Helmholtz habitualmente se usan para establecer una zona de campo magnético conocido y uniforme para diversas aplicaciones. Es importante conocer la zona donde dicho campo magnético es uniforme con las distintas variables espaciales x, y, z. En la zona donde se genera un campo magnético uniforme, se pueden hacer las calibraciones de sensores magnéticos y sondas de campo magnético, en un rango de bajas frecuencias. Este trabajo se dedica a calcular y medir el campo magnético generado por las bobinas de Helmholtz y determinar la uniformidad y la exactitud del campo magnético respecto al centro de simetrı́a  del sistema estudiado.

Descargas

Los datos de descarga aún no están disponibles.

Biografía del autor/a

  • Ramiro Alonso, Universidad de Buenos Aires, Facultad de Ingeniería
    Ingeniero Electrónico. Docente investigador, Facultad de Ingeniería, Universidad de Buenos Aires

Referencias

W. G. Fano, “Emisiones de rf de las lámparas fluorescentes de bajo consumo,” Interference Technology, vol. Europe EMC Guide 2013, pp. 116–121, 2013. [Online]. Available: http://www.interferencetechnology.com/

C. Paul, Introduction to Electromagnetic Compatibility, ser. Wiley Series in Microwave and Optical Engineering. Wiley, 2006.

E. Maffia, V. Trainotti, F. W. G., and N. Trench, “Medición de la resonancia de schumann,” Latinmag Letter, vol. 1, no. A02, pp. 1–8, 2011.

R. A. Pahl, J. L. Rovey, and D. J. Pommerenke, “Calibration of magnetic field probes at relevant magnitudes,” in 2013 19th IEEE Pulsed Power Conference (PPC), June 2013, pp. 1–6.

W. G. Fano, R. Alonso, and L. M. Carducci, “Near field magnetic probe applied to switching power supply,” in 2016 IEEE Global Electromagnetic Compatibility Conference (GEMCCON), Nov 2016, pp. 1–4.

V. Trainotti, W. G. Fano, and L. Dorado, Ingenieria Electromagnetica, 1st ed., N. Libreria, Ed. Nueva Libreria, 2006, vol. 2.

H. Trzaska, Electromagnetic Field Measurements in the Near Field. Noble Publishing Corp., 2001.[8] D. M. Petrovik and M. D. Radic, “Generalization of helmholtz coil problem,” Serbian Journal of Electrical Engineering, vol. 12, no. 3, pp. 375–384, October 2015.

R. Merritt, C. Purcell, and G. Stroink, “Uniform magnetic field produced by three, four, and five square coils,” Review of Scientific Instruments, vol. 54, no. 7, pp. 879–882, 1983.

X. Lu and J. T., “Simulation for the polygonal coil magnetic field,” Simulation for the Polygonal Coil Magnetic Field, vol. 6, no. 2, pp. 43–49, October 2013.

J. Wang, S. She, and S. Zhang, “An improved helmholtz coil and analysis of its magnetic field homogeneity,” Review of Scientific Instruments, vol. 73, no. 5, pp. 2175–2179, 2002.

P. Baranov, V. Baranova, S. Uchaikin, and Y. Pisarenko, “Creating a uniform magnetic field using axial coils system for calibration of magnetometers,” 2016 Dynamics of Systems, Mechanisms and Machines (Dynamics), pp. 1–5, Nov 2016.

C. Johnk and S. Everest, Ingenierı́a electromagnética: campos y ondas. Limusa, 1981.

J. C. Fernandez, Ingenieria Electromagnetica. I Modelos estáticos y circuitales, 1st ed., Eudeba, Ed. Nueva Libreria, 2013, vol. 1.

J. R. Reitz and F. J. Milford, Fundamentos de la Teorı́a Elecro-magnética, 1st ed., U. T. E. Hispano-Americana, Ed. UTEHA, 1972, vol. 1.

E. Bronaugh, “Helmholtz coils for calibration of probes and sensors: Limits of magnetic field accuracy and uniformity,” Proceedings of International Symposium on Electromagnetic Compatibility, 1995.

C. A. Balanis, Antenna Theory: Analysis and Design. Wiley-Interscience, 2005.

I. Dolezel, K. Pavel, and S. Pavel, Integral Methods in Low-Frequency Electromagnetics. Wiley, 2009.

D. J. De Troye and R. J. Chase, “The calculation and meassurement of helmholtz coil fields,” Army Research Laboratory.

G. A. Morgan, “Analysis and calibration of loop probes for use in measuring interference fields,” Naval Research Laboratory, vol. 1, no. NRL REPORT R-3486, pp. 1–54, 1949.

Descargas

Publicado

2017-08-20

Número

Sección

Telecomunicaciones e Industria y Sistemas Aeroespaciales

Cómo citar

[1]
W. G. Fano, R. Alonso, and G. Quintana, “El Campo Magnético Generado por las Bobinas de Helmholtz y sus Aplicaciones a Calibración de Sondas”, Elektron, vol. 1, no. 2, pp. 91–96, Aug. 2017, doi: 10.37537/rev.elektron.1.2.25.2017.